LM5150QRUMRQ1 IN STOCK
LM5150QRUMRQ1 Packaging information Package | Pins
WQFN (RUM) | 16
LM5150QRUMRQ1 Operating temperature range (°C)
-40 to 150
LM5150QRUMRQ1 Features
AEC-Q100 qualified:Device temperature grade 1: –40°C to +125°C ambient operating temperature rangeDevice HBM ESD classification level 2Device CDM ESD classification level C4BFunctional Safety-CapableDocumentation available to aid functional safety system designWide VIN input range from 1.5 V to 42 V when VOUT ≥ 5 V (65-V absolute maximum)Low shutdown current (IQ ≤ 5 µA)Low standby current (IQ ≤ 15 µA)Four programmable output voltage options and two selectable configurations6.8 V, 7.5 V, 8.5 V, or 10.5 VStart-stop or e-call configurationsAdjustable switching frequency from 220 kHz to 2.3 MHzAutomatic wake-up and standby mode transitionOptional clock synchronizationBoost status indicator1.5-A peak MOSFET gate driverAdjustable cycle-by-cycle current limitThermal shutdown16-pin WQFN with wettable and non-wettable flank optionsCreate a custom design using the LM5150-Q1 with the WEBENCH Power Designer
LM5150QRUMRQ1 Description
The LM5150-Q1 device is a wide input range automatic boost controller. The device is suitable for use as a pre-boost converter which maintains the output voltage from a vehicle battery during automotive cranking or from a back-up battery during the loss of vehicle battery.
The LM5150-Q1 switching frequency is programmed by a resistor from 220 kHz to 2.3 MHz. Fast switching (≥ 2.2 MHz) minimizes AM band interference and allows for a small solution size and fast transient response.
The LM5150-Q1 operates in low IQ standby mode when the input or output voltage is above the preset standby thresholds and automatically wakes up when the output voltage drops below the preset wake-up threshold.
The device transients in and out of the low IQ standby mode to extend battery life at light load. A single resistor programs the target output regulation voltage as well as the configuration. Additional features include low shutdown current, boost status indicator, adjustable cycle-by-cycle current limit, and thermal shutdown.